Name: Push-Pull IP67
Brand: binder
SKU: 09 4911 015 04

Illustration 09 4911 015 04 - Push Pull Male panel mount connector, Contacts: 4, unshielded, solder, IP67 — Illustration

3D View 09 4911 015 04 - Push Pull Male panel mount connector, Contacts: 4, unshielded, solder, IP67 — 3D View

Component part drawing 09 4911 015 04 - Push Pull Male panel mount connector, Contacts: 4, unshielded, solder, IP67 — Component part drawing

Scale drawing 09 4911 015 04 - Push Pull Male panel mount connector, Contacts: 4, unshielded, solder, IP67 — Scale drawing

Assembly instructions / Panel cut-out 09 4911 015 04 - Push Pull Male panel mount connector, Contacts: 4, unshielded, solder, IP67 — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 4911 015 04 - Push Pull Male panel mount connector, Contacts: 4, unshielded, solder, IP67 — Contact arrangement (Plug-in side)

This male panel mount connector mit Push-Pull Verriegelung and a pin count of 4 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 2. In places where light, non-conductive soiling may occur, but temporary conductivity due to condensation must be expected in some cases. With temperatures ranges of -40 °C/85 °C is this unshielded Push-Pull male panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 125 V and the rated current of 3,0 A it is perfectly tuned for its field of application.

Moreless

Part no.	09 4911 015 04
Connector design	Male panel mount connector
Version	Connector pin straight
Connector locking system	Push-Pull
Termination	solder
Degree of protection	IP67
Cross-sectional area	0.25 mm² / AWG 24
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 500 Mating cycles
Weight (g)	9.86
Customs tariff number	85369010
Country of Origin	DE

Moreless

Rated voltage	125 V
Rated impulse voltage	1500 V
Rated current	3,0 A
Pollution degree	2
Overvoltage category	I
Insulating material group	II
EMC compliance	unshielded

Moreless

Contact body material	PUR/PA
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	f668e8b5-33f7-417b-81d1-ad5c500def27

Moreless

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

General Disclaim Notice

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".

Downloads

all (PDF)

Data sheet

Data sheet 09 4911 015 04