Part no.: 79 0237 20 07
RD24 Male angled connector, Contacts: 6+PE, unshielded, moulded on the cable, IP67, PVC, black, 7 x 0.75 mm², 2 m
RD24, series 692, Power Connectors
This male angled connector with screw locking and a pin count of 6+PE is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/80 °C is this unshielded RD24 male angled panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 250 V and the rated current of 8,0 A it is perfectly tuned for its field of application.
General features
MorelessPart no. | 79 0237 20 07 |
Connector design | Male angled connector |
Cable length | 2 m (Standard 2 m and 5 m. Other lengths are available on request.) |
Version | Connector pin angled |
Connector locking system | screw |
Termination | moulded on the cable |
Degree of protection | IP67 |
Cross-sectional area | 0.75 mm² / AWG 18 |
Temperature range from/to | -25 °C / 80 °C |
Mechanical operation | > 500 Mating cycles |
Weight (g) | 314.00 |
Customs tariff number | 85444290 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 250 V |
Rated impulse voltage | 4000 V |
Rated current | 8.0 A |
Insulation resistance | ≥ 1010 Ω |
Pollution degree | 3 |
Overvoltage category | III |
Insulating material group | III |
EMC compliance | unshielded |
Material
MorelessContact body material | PA12 |
Contact material | CuZn (brass) |
Contact plating | Ag (silver) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | 0073cfce-e1b9-4fa6-962e-ecf98f83a554 |
Classifications
MorelesseCl@ss 11.1 | 27-06-03-11 |
ETIM 9.0 | EC002638 |
Declarations of conformity
MorelessLow Voltage Directive | 2014/35/EU (EN 60204-1:2018;EN 60529:1991) |
RoHS Directive | 2011/65/EU (EN 50581:2012) |
Cable data
MorelessStructure of the cable | |
Cross section | 7 x 0.75 mm² |
Sheath material | PVC |
Single-lead insulation | PVC |
Single-lead structure | 24 x 0.20 mm |
Cable color | black |
Thermal properties | |
Temperature range cable in move from/to | -5 °C / 80 °C |
Temperature range cable fixed from/to | -20 °C / 80 °C |
Other features | |
Halogen free | no |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 79 0237 20 07
download
REACH
79 0237 20 07
download
RoHS
79 0237 20 07
download
China RoHS
79 0237 20 07
download
Declaration of conformity
Low Voltage Directive
download
UKCA declaration of conformity
Electrical Equipment
download
Declaration of conformity
RoHS Directive
download
UKCA declaration of conformity
UK-RoHS
download
CAD files
Select required format