Menu
Back
  1. Products
  2. Miniature connectors
  3. M16 IP67
  4. M16 Female panel mount connector, Contacts: 19 (19-a), unshielded, THT, IP67, UL, front fastened
Part no.: 09 0464 290 19

M16 Female panel mount connector, Contacts: 19 (19-a), unshielded, THT, IP67, UL, front fastened

M16 IP67, series 723, Miniature Connectors
This female panel mount connector with screw locking and a pin count of 19 (19-a) is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 1. In places where there is no or only slight, but non-conductive soiling. The pollution has no influence. With temperatures ranges of -25 °C/95 °C is this unshielded M16 IP67 female panel mount connector designed for both severe cold and severe heat and has the UL approval. Due to the qualified rated voltage of 60 V and the rated current of 3,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-106.
General features
Moreless
Part no. 09 0464 290 19
Connector design Female panel mount connector
Type standard DIN EN 61076-2-106
Version Connector socket straight
Connector locking system screw
Termination THT
Degree of protection IP67
Cross-sectional area 0.50 mm² / AWG 20
Temperature range from/to -25 °C / 95 °C
Mechanical operation > 100 Mating cycles
Weight (g) 9.65
Customs tariff number 85369010
Country of Origin DE
Rated voltage 60 V
Rated impulse voltage 500 V
Rated current 3,0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance unshielded
Shield connection Shield pin
Housing material Zinc die-cast nickel-plated
Contact body material PBT (UL94 V-0)
Contact material CuSn (bronze)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number bb22b296-7641-4138-9f6d-940f1716b0d7
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. The protection class specification applies on condition that the four mounting holes are made as blind holes.
M16 IP67
09 0464 290 19