Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. M8
  4. Snap-In Female angled connector, Contacts: 3, unshielded, PVC, black, 3 x 0.14 mm²
Part no.: 79 3414 05 03

Snap-In Female angled connector, Contacts: 3, unshielded, PVC, black, 3 x 0.14 mm²

M8, series 718, Automation Technology - Sensors and Actuators
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 79 3414 05 03
Connector design Female angled connector
Type standard DIN EN 61076-2-104
Version Connector socket angled
Connector locking system snap-in
Weight (g) 69.00
Customs tariff number 85444290
Country of Origin DE
Rated voltage 50 V (AC) / 60 V (DC)
EMC compliance unshielded
Housing material PUR
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 62dd9114-a519-43ca-9e45-b39576e1a601
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive 2011/65/EU (EN 50581:2012)
Cable data
Moreless
Structure of the cable
Cable diameter 4.5 mm
Cross section 3 x 0.14 mm²
Sheath material PVC
Single-lead insulation PVC
Single-lead structure 7 x 0.25 mm
Cable color black
Electrical properties
Conductor resistance 148 Ω/Km (20°C)
Thermal properties
Temperature range cable in move from/to -5 °C / 70 °C
Temperature range cable fixed from/to -25 °C / 70 °C
Other features
Halogen free no
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  6. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  7. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  8. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 40 cNm).
Downloads
Data sheet
Data sheet 79 3414 05 03
PDF
REACH
79 3414 05 03
PDF
RoHS
79 3414 05 03
PDF
China RoHS
79 3414 05 03
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
Declaration of conformity, RoHS Directive
Declaration of conformity
RoHS Directive
PDF
UKCA declaration of conformity, UK-RoHS
UKCA declaration of conformity
UK-RoHS
PDF
CAD files
Select required format
M8
79 3414 05 03