Menu
Back
  1. Products
  2. Automation technology - Sensors and actuators
  3. Connecting cords
  4. M12 Lead-through for control cabinet, Contacts: 4, shielded, pluggable, IP67, UL, M12x1.0
Part no.: 09 5240 10 04

M12 Lead-through for control cabinet, Contacts: 4, shielded, pluggable, IP67, UL, M12x1.0

series 765, Automation Technology - Sensors and Actuators
Available numbers of contacts
Compare product
Downloads
The lead-through for control cabinet with screw locking and a pin count of 4 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this shielded connecting cableen lead-through for control cabinet designed for both severe cold and severe heat. UL Due to the qualified rated voltage of 250 V and the rated current of 4,0 A it is perfectly tuned for its field of application. It complies with the type standard DIN EN 61076-2-101.
General features
Moreless
Part no. 09 5240 10 04
Connector design Lead-through for control cabinet
Type standard DIN EN 61076-2-101
DIN EN 61076-2-106
Version Lead-through for control cabinet
Connector locking system screw
Termination pluggable
Degree of protection IP67
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 40.28
Customs tariff number 85369010
Country of Origin DE
Rated voltage 250 V
Rated impulse voltage 2500 V
Rated current 4.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance shielded
Voltage 1400 V DC
Housing material CuZn (Brass nickel plated)
Contact body material PA black
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material CuZn (brass)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 2764c06b-ca36-4a2d-a261-628532c1b151
ETIM 9.0 EC003569
Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991)
General Disclaim Notice
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
Downloads
Data sheet
Data sheet 09 5240 10 04
PDF
Data sheet, Data sheet 09 5240 10 04
Certificates
UL certificate
PDF, 572.41 KB
REACH
09 5240 10 04
PDF
RoHS
09 5240 10 04
PDF
China RoHS
09 5240 10 04
PDF
Declaration of conformity, Low Voltage Directive
Declaration of conformity
Low Voltage Directive
PDF
UKCA declaration of conformity, Electrical Equipment
UKCA declaration of conformity
Electrical Equipment
PDF
CAD files
Select required format
Connecting cords
09 5240 10 04