Part no.: 77 1434 1429 50003-0500
7/8" Connecting cable male cable connector - female angled connector, Contacts: 2+PE, unshielded, moulded on the cable, IP68, UL, PUR, black, 3 x 1.50 mm², 5 m
7/8", series 870, Automation Technology - Voltage and Power Supply
This female cable connector with male cable connector - female angled cable connector with screw locking and a pin count of 2+PE is according to its protection class IP68 Dustproof and complete protection against contact. Protection against permanent submersion. Unless otherwise specified, protection up to 1 meter water depth. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -25 °C/80 °C is this unshielded 7/8" connecting cable male cable connector - female angled panel mount connector designed for both severe cold and severe heat. und has the UL approval. Due to the qualified rated voltage of 300 V (600 V UL) and the rated current of 13,0 A it is perfectly tuned for its field of application.
General features
MorelessPart no. | 77 1434 1429 50003-0500 |
Connector design | Connecting cable male cable connector - female angled connector |
Cable length | 5 m (Other lengths are available on request). |
Version | Connecting cable |
Connector locking system | screw |
Termination | moulded on the cable |
Degree of protection | IP68 |
Cross-sectional area | 1.50 mm² / AWG 16 |
Temperature range from/to | -25 °C / 80 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 414 |
Customs tariff number | 85444290 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 300 V (600 V UL) |
Rated impulse voltage | 2500 V |
Rated current | 13.0 A |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | I |
EMC compliance | unshielded |
Material
MorelessHousing material | PUR |
Contact body material | PUR |
Contact material | CuZn (brass) / CuSn (bronze) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | ca3c395c-1005-4772-83b9-135c8dca3132 |
Authorization/approvals
MorelessApprovals | UL |
Classifications
MorelessETIM 9.0 | EC002638 |
Declarations of conformity
MorelessLow Voltage Directive | 2014/35/EU (EN 60529:1991;EN 60204-1:2018) |
Cable data
MorelessStructure of the cable | |
Cable diameter | 7.4 mm |
Cross section | 3 x 1.50 mm² |
Sheath material | PUR |
Single-lead insulation | TPM |
Single-lead structure | 82 x 0.15 mm |
Cable color | black |
Mechanical properties | |
Bending radius, fixed cable | ≥ 7.5 x Ø |
Bending radius, moving cable | ≥ 10 x Ø |
Bending cycles | 5 million |
Permitted acceleration | 5 m/s² |
Travel distance, horizontal | 20 m |
Travel speed | ≤ 300 m/min |
Thermal properties | |
Temperature range cable in move from/to | -20 °C / 80 °C |
Temperature range cable fixed from/to | -50 °C / 80 °C |
Other features | |
Halogen free | yes |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.5 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
Downloads
Data sheet
Data sheet 77 1434 1429 50003-0500
download
Certificates
UL certificate
download
REACH
77 1434 1429 50003-0500
download
RoHS
77 1434 1429 50003-0500
download
China RoHS
77 1434 1429 50003-0500
download
Declaration of conformity
Low Voltage Directive
download
UKCA declaration of conformity
Electrical Equipment
download
CAD files
Select required format