Part no.: 77 9753 4530 50704-1000
M12/RJ45 Connecting cable female cable connector - RJ45 connector, Contacts: 4, shielded, molded/crimp, IP67, UL, Profinet/Ethernet CAT5e, PUR, green, 4 x AWG 22, 10 m
M12-D, series 876, Automation Technology - Data Transmission
This female cable connector with female cable connector - RJ45 connector with screw locking and a pin count of 4 is according to its protection class IP67 Dust-tight and has complete protection against contact and protection against temporary immersion. It can be used in areas with a pollution degree of 3. In places where contamination can occur that is conductive or can become conductive through condensation. With temperatures ranges of -40 °C/85 °C is this shielded M12-D coded connecting cable female cable connector - RJ45 connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 50 V and the rated current of 1,5 A it is perfectly tuned for its field of application.
General features
MorelessPart no. | 77 9753 4530 50704-1000 |
Connector design | Connecting cable female cable connector - RJ45 connector |
Cable length | 10 m (Other lengths are available on request). |
Version | Connecting cable |
Connector locking system | screw/lock |
Termination | molded/crimp |
Degree of protection | IP67 |
Cross-sectional area | 1 x 4 x AWG 22 |
Temperature range from/to | -40 °C / 85 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 840 |
Electrical parameters
MorelessRated voltage | 50 V |
Rated impulse voltage | 1000 V |
Rated current | 1.5 A |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
EMC compliance | shielded |
Material
MorelessContact body material | PUR |
Contact material | CuSn (bronze) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | SCIP-number not available |
Authorization/approvals
MorelessApprovals | UL |
Classifications
MorelessETIM 9.0 | EC002638 |
Cable data
MorelessStructure of the cable | |
Cable type | Profinet/Ethernet CAT5e |
Cable diameter | 6.7 mm |
Cross section | 4 x AWG 22 |
Sheath material | PUR |
Single-lead insulation | Polyolefin |
Single-lead structure | AWG 22/7 |
Cable color | green |
Mechanical properties | |
Bending radius, fixed cable | ≥ 5 x Ø |
Bending radius, moving cable | ≥ 15 x Ø |
Bending cycles | 2 million |
Permitted acceleration | max. 2 m/s² |
Travel distance, horizontal | at 5 m/s² -> 5 m |
Travel distance, vertical | at 5 m/s² -> 5 m |
Travel speed | ≤ 200 m/min (5 m horizontal distance) |
Thermal properties | |
Temperature range cable in move from/to | -20 °C / 60 °C |
Temperature range cable fixed from/to | -40 °C / 80 °C |
General Disclaim Notice
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".